This is what mine says
A problem has been detected and windows has been shut down to prevent damage to your computer.
DRIVER_IRQL_NOT_LESS_THAT_OR_EQUAL
If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again follow these steps:
Check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any windows updates you might need.
If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use Safe Mode to remove or disable components, restart your computer, press F8 to select advanced options, and then select Safe Mode.
Technical information:
*** STOP: 0x000000D1 (0x0010C3D6, 0x00000005, 0x00000008, 0x0010C3D6)
Yeah word for word for the win
Bad device driver, mismatched or failing ram, or corrupted pagefile.sys... I would first look at making sure your drivers are up to date -- failing that, I'd run memtest for a few hours. Lastly, I'd ensure that the ram chips are matching (assuming dual-channel memory capabilities of your board), and then start looking at your pagefile.
